EFLEX is Available in Many Sizes Ranging from 30 to 200 Ready to Be Delivered upon Request. The standard dimensions of EFLEX are as shown in the table below. A pilot wire is provided inside EFLEX in the course of its production. It is connected with the cable pilot wire to pull the cable into the pipe. EFLEX is, as a rule, shipped from the Factory wound in a coil. A pilot wire has an allowable tensile strength of 50 kg.

EFLEX
Offers a Range of Merits Not Shared by Conational Conduits Such as Steel and PVC pipes
1.Easy to Bend
         Because of its corrugations, EFELX can be bent freely and can be easily laid around obstacles.
2.Available in Continuous Lengths
         EFLEX is available in continuous lengths to overcome problems of installation and save labor required in coupling conventional cable conduits. This save costs and time needed for installation work.
3. Light - Weight
         Made of polyethylene, EFLEX is much lighter and easier to carry and lay than the troughs, Hume pipes and other conventional cable conduits.

4. Mechanically Strand
         Corrugations give EFLEX high flattening strength. EFLEX does not collapse in the ground.
5. Highly Corrosion and Weather Resistant.
6. Safe
         Flexible and resistant to pressure, EFLEX is safe against earthquakes, and ground subsidence, etc.
7. Allows Easy Cable Pull - in
         EFLEX’ s low coefficient of friction and internal pulling wire make it easy to pull cables in. Thus EFLEX permits longer distances between handholds.
8. Highly Reliable
9. Economical

Considering all of these features, EFLEX is far more economical than other cable conduits.  It can be laid more efficiently in a shorter length of time and demands fewer handholds.